CDI 6200 for pipes up to 1.5″

Price Range: $525 – $625

Although our initial ruggedized flowmeter is still available for purchase, we now offer the CDI 5000 Series flowmeters with the same great features and the option for wireless monitoring.

The flowmeter clamps onto a pipe, with two flowsensing probes projecting into the pipe through 3/16 in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the display indicates flow directly, with no setup or adjustment.




  • Easy to install
  • Housing and display rotate to suit piping orientation
  • IP-66 rating; suitable for wet locations
  • Milliamp and pulse outputs
  • Optional RS-485 output for networking

The CDI 6200 is a true thermal-mass flowmeter, adapted for easy installation in existing piping systems. Its large, bright LED display is easy to read from a distance and its weather-proof enclosure and surge protection make it suitable for outdoor installation. A 4-20 mA output and a pulse output are standard; a wired Modbus RS485 output is available as an option.

Additional information

Number of Rings

2 Rings

Material Type

, ,

Nominal Pipe Sizes

1/2 in. – 1.5 in., 25 mm – 40 mm, DN15 – DN40


5 percent of reading plus one percent of full scale at an air temperatures from 20 to 120 degrees Fahrenheit (-6.5 to 49 Celsius) and a pressure of 100 psig (7 bar).


Compressed Air, Nitrogen

Operating Pressure

200 psig (14 bar) maximum on Sch. 40 steel and on Type L copper below three inch; consult CDI for other materials and sizes.

Input Power

250 mA at 20 to 28 Vdc

Output Resistance

400 Ohms max.

Exposed Materials

Stainless steel, aluminum, gold, thermal epoxy and Viton (seal)


Four digit LED display

Response Time

One second to 63 percent of final value



Model No Nominal Pipe Size Range (scfm) Price
6200-05S 0.5 in. (DN15) 100 $525
6200-07C, 6200-07S 0.75 in. (DN20) 150 $525
6200-10C, 6200-10S 1.0 in. (DN25) 200 $575
6200-12C, 6200-12S 1.25 in. (DN32) 300 / 400 $625
6200-15C, 6200-15S 1.5 in. (DN40) 400 $625
6200-25M 25 mm 200 $575
6200-40M 40 mm 400 $625

* Note: A wall plug power supply modification is available.


Click the files below to download.

CDI 6000 Series Quickstart

CDI 6200 Datasheet

CDI 6200 Instructions

CDI 6200 Shop Drawing

CDI Flowmeter Ranges

CDI Units of Measure Explanation

CDI Flowmeter Wiring

You may also like…

  • 4 – 20 Milliamp Data Logger


    Lascar EL-USB-4 milliamp data logger with a connection cable to facilitate use with CDI flowmeters. The logger has a storage capacity of 32,000 samples; it plugs into a USB port for configuration and download.


  • CDI 6000 Series Power Supply


    24 VDC wall plug power supply, built-in jack, and extension cord for 6000 Series meters.

  • CDI 5200 Drill Guide for 1/2” to 1-1/2” pipes


    This universal guide is for use with all CDI-25, 5200 and 6200 meters (pipe sizes 1.5″ or less). It includes a 3/16″ drill bit, 3/16″ and 1/4″ hex wrenches, and an aluminum drill guide with two 3/16″ drill bushings spaced 2.250″ apart. These guides can be attached to the pipe with a band clamp, a C-clamp or a chain clamp.