CDI 5200 for pipes up to 1.5″

Price Range: $445 – $545

The CDI 5200 clamps onto a pipe, with two flow-sensing probes projecting into the pipe through 3/16-in. drilled holes. It seals directly to the pipe; no cutting or welding is required for installation. Because each flowmeter is made and calibrated for a specific size of pipe, the digital display indicates flow directly, with no setup or adjustment.

view_datasheet_btn

Category:

FLOWMETER FOR COMPRESSED-AIR SYSTEMS

  • Easy to install
  • No moving parts
  • Weather resistant and surge protected
  • Milliamp output
  • Pulse output convertible to threshold output
  • User-configurable scaling, filtering and units of measure
  • Optional wired and wireless outputs for networking

The CDI 5200 is a true thermal-mass flowmeter, adapted for easy installation in existing piping systems. Its large, bright LED display is easy to read from a distance and its weather-proof enclosure and surge protection make it suitable for outdoor installation. A 4-20 mA output and a pulse output are standard; wired and wireless outputs are available as options.

The CDI 5200 meters are commonly used for point-of-use monitoring of compressed air in textile mills, food packaging plants, groundwater remediation, printing plants and bottling plants; they are also widely used for branch-line monitoring.

The display can be configured to show flow in scfm, m3/min and m3/hr; it can also be configured to display daily usage or cumulative usage rather than current flow.

Additional information

Number of Rings

2 Rings

Material Type

, ,

Nominal Pipe Sizes

1/2 in. – 1.5 in., 25 mm – 40 mm, DN15 – DN40

Accuracy

5 percent of reading plus 1 percent of range for flows from 10 percent to 100 percent of indicated range at air temperatures between 20 and 120 degrees Fahrenheit

Fluids

Compressed Air, Nitrogen

Operating Pressure

200 psig maximum on Sch. 40 steel and on Type L Copper; consult CDI for other materials and higher pressures.

Input Power

250 mA at 24 Vdc

Output Resistance

600 Ohms max.

Exposed Materials

Stainless steel, gold, thermal epoxy and Viton (seal)

Ring Material

Aluminum

Display

Four digit LED display

Response Time

One second to 63 percent of change in value at flows above 30 percent of range.

Pricing

Model No Nominal Pipe Size Range (scfm) Price
5200-05S 0.5 in. (DN15) 100 $445
5200-07C, 5200-07S 0.75 in. (DN20) 150 $445
5200-10C, 5200-10S 1.0 in. (DN25) 200 $495
5200-12C, 5200-12S 1.25 in. (DN32) 200 $545
5200-15C, 5200-15S 1.5 in. (DN40) 300 $545
5200-25M 25 mm 150 $495
5200-40M 40 mm 300 $545

Resources

Click the files below to download.

CDI 5000 Series Quickstart Guide

CDI 5200 Datasheet

CDI 5200 Instructions

CDI 5200 Shop Drawing

CDI 5200 DN Datasheet

CDI Rev3 Configuration

CDI Flowmeter Ranges

CDI 5000 Series Wiring

CDI Rev3 Customization

CDI Units of Measure Explanation

View CDI 5200 Installation Video

 

You may also like…

  • 4 – 20 Milliamp Data Logger

     $125.00
  • Summing Remote Display – for CDI 5200 & 5400 Series

     $95.00
  • Wireless Networking

  • CDI 5200 Drill Guide for 1/2” to 1-1/2” pipes

     $65.00